3mm Filament Extruder Assembled

The purpose of the extruder is to pull the material off of the spool or roll, and push it with force along/through a tube on a path into the hot-end. 



The extruder is located far from the nozzle and a Teflon tube connects the nozzle and the extruder, so that the nozzle is prevented from being clogged by the dust from the knurled bolt on the extruder. 



3mm Extruder needs a 3mm Nozzle and a 3mm PLA

Rating: Bad   

 

 

 

 

  Good

Continue